Best 7 1/4 Circular Saw Blades 2022: Top Picks Reviewed


7 1/4 Circular Saw Blades

Best 7 1/4 Circular Saw Blades for Smooth Finishing in 2022: Old saw blades provide unsatisfactory results. If your seven ¼” circular saw blades fail to cut wood smoothly, time to replace the blade.
But the numerous blade models available in the market may confuse you. This article can help you to get you out of the dilemma.

We have done extensive research and tested several models. Finally, we have selected the seven best seven ¼ circulars saw blades. All of the blades we have listed offer top-notch performance. First, decide the teeth count you want, and then you can purchase the model you like. So, Let’s Begin!

Number of Teeth You Should Have on Your 7 ¼ Circular Saw Blade

The number of teeth is an essential factor you need to consider when buying a saw blade. Blades with fewer teeth cut faster, but the finishing is rough. On the other hand, higher teeth mean a slower cut but smooth finishing. Following are some of the available teeth numbers for 7 ¼ circular saw blades:

  • 24-Teeth

24 teeth models fall on the lower side. It works fast but produces an average smooth finishing. If you want to do ripping, then this is the perfect option.

  • 40-Teeth

40-teeth models are the most common 7 ¼ circular saw blades. It offers a balanced performance. Whether you want to do ripping or cut wood for furniture, this should do the job.

  • 60-Teeth

If you want a smooth finish, then the 60-teeth option is a perfect option. However, it is slightly slow, but not too much. So, you can get it for framing and other cutting jobs.

Other Options

Besides these numbers, other options are also available such as 14-teeth, 80-teeth, etc. Considering the size of 7 ¼”, the above three are the most suitable circular saw blades for cutting wood.

Top 7 Best 7 ¼ Circular Saw Blades 2022 for Smooth Finishing

Once you have decided the number of teeth you want, you can check various models. Following are the seven best 7 ¼ circulars saw blades available in the market:

1. Freud D0740A Diablo 7-1/4 40 Tooth ATB Finishing Saw Blade

 

 

 

Freud Diablo offers an excellent 7 ¼ circular saw blade with many features. It has razor-sharp 40 teeth for clean cutting and fine finishes. The blade can give you next-level woodworking experience.

High-quality titanium carbide materials make the blade quite tough and highly durable. Moreover, the tri-metal shock-resistant brazing extends the durability of the blade. This strong material also enables the blade to provide excellent woodcutting performance. Besides, the coating produces minimal strain.

Vibrations and loud noises during work are irritating. Diablo uses a laser-cut arbor to reduce the vibration to a great level. Besides, the laser-cut stabilizer vents help keep the noise minimal. Overall the Diablo 7 ¼ offers great performance, excellent durability, and stability.

Pros
  • It can be used on softwood, hardwood, plywood, and fascia board.
  • It is made of micrograin titanium carbide for excellent durability.
  • Less noise and vibration.
  • Produces low heat.
  • Offers smooth finishing.
Cons
  • The price could be lower.

2. COMOWARE Circular Saw Blades 7 1/4 inch

 

 

Comoware blade is another one that comes with 40 teeth. In the case of performance, it is no less than the previous one. VC1 tungsten carbide makes the teeth tip sharper and more durable. It enables the blade to cut softwood and hardwood efficiently.

Vibrations during cutting are irritating, which may lead to rough results. Luckily Comoware uses a unique anti-vibration design. Now you can do woodwork more with more convenience. Moreover, the ⅝” diamond arbor enables the blade to fit in both round and diamond hole blade machines.

Comoware uses a high-quality ATB style to ensure the accuracy of cutting. You can do cross-cutting too with this blade. Overall, Comoware offers one of the best 7 ¼ 40teeth circular saw blades.

Pros
  • Outstanding longevity with the high-quality tungsten carbide material.
  • Anti-vibration teeth design.
  • Wide range of usability.
  • Excellent accuracy.
  • High-quality bevels for reducing tear-out on cross-cutting.
Cons
  • Not suitable for ripping.

3. IRWIN Tools MARATHON Carbide Corded Circular Saw Blade, 7 1/4-inch

 

Are you finding a blade for ripping out wood? Well, then we recommend you IRWIN Marathon saw blade. You can either go for the 24 teeth or 20 teeth. The 24 tooth variant should provide better results. But you also can go for 20 teeth if you want fast cutting. In the case of build quality, Marathon uses construction-grade carbide. This tough material enables you to cut with better efficiency. Then the silicon coat reduces pitch and resin buildup while cutting. Hence, slicing the woods becomes more convenient.

IRWIN Marathon also includes a unique heat expansion slot. It keeps the heat to a low level. Hence, you get a low vibration experience, which also extends the durability. You can use this for both home and professional woodwork. In short, it is one of the best 7 ¼ circular blades for ripping.

Pros
  • Long-lasting blade.
  • Decent accuracy.
  • Affordable price.
  • Excellent for ripping all woods.
  • Fast cutting.
  • Easy to use.
Cons
  • Poor packaging.

4. DEWALT DWA171460 7-1/4-Inch 60-Tooth Circular Saw Blade

 

Not satisfied with the finishing 40 tooth blades provided? Well, the Dewalt 60 tooth model might offer the finishing you want. The wood you cut will be smooth and clean. Additionally, the blade is capable of cutting different woods without tearing or chipping. It also offers several more benefits too.

The Dewalt circular blade uses high-density tungsten carbide ingredients. It makes the blade sturdy and highly durable. Moreover, the anti-stick coating enables the blade to reduce friction and gum. It reduces the vibration while cutting wood. Also, it increases the longevity of the blade.

At present, many people prefer to use cordless saws. The Dewalt circular blade is optimized for use on both cordless and corded saws with maximum stability. This model is ideal for framing and cross-cutting. It is one of the best for cutting laminated wood.

Pros
  • Precise cutting.
  • Smooth finishing.
  • Durable teeth.
  • Low vibration and sound.
  • Excellent for both hardwood and softwood.
Cons
  • Average efficiency on plywood.

5. Luckyway 7-1/4 Inch 24T&60T with 5/8 Inch Diamond Arbor TCT Circular Saw Blade

 

Have you read the teeth guide we discussed in the beginning? If yes, we guess you know which number you want to go for. That’s because Luckyway is offering multiple options here. You can go for different sizes too. In the case of 7 ¼, Luckyway offers 24 teeth, 40 teeth, and 60 teeth. You already know about their capabilities. So, let’s discuss other features.

A steel body with tungsten carbide teeth makes the blade pretty tough. As a result, you get sharp, accurate, and efficient cutting. A wide range of usage is applicable based on the tooth number. Most importantly, all of them are capable of providing smooth finishing.

The unique design of the top bevel ensures clean cutting. A protective sleeve comes with each blade. Cover the teeth with the sleeve when not using it to enhance longevity. Luckyway circular saw blades are compatible with the round and diamond hole blade machine. Overall, it provides excellent performance and is worth your money.

Pros
  • Various size & tooth options are available.
  • Versatile application.
  • Sandwich welding technology for better performance on cutting through nails.
  • Protective sleeves for the safety of the teeth.
  • Budget-friendly.
Cons
  • No heat expansion slots.
  • Makita B-61656 7-1/4″ 24

6. T Max Efficiency Circular Saw Blade

 

Makita 7 ¼ circular saw blades are excellent performers. The manufacturer claims that these blades perform 70% better than any standard saw blades. It comes with 24 teeth and cuts wood super fast. The ultra-thin kerf helps the blades to work with such speed.

Thin doesn’t mean less durable. Makita uses high-grade tungsten carbide teeth to ensure maximum durability. Besides, the special design on top of the teeth provides smoother finishing. The tips are angled at 23° to offer such results. It offers great value for the price too. If you buy one piece, it will cost you approximately $10. But if you go for the set of 3, the price is only around $17. Hence we recommend you to go for the latter option.

Pros
  • Special ATAFR (Alternate Top Alternate Face w/Raker) carbide tips better finishing.
  • Thin kerf to reduce the load on the tool.
  • Fast cutting speed.
  • Great value for money.
Cons
  • Average performance on tough woods.

7. GoYonder 7 1/4 Inch Circular Saw Blade

 

 

GoYonder 7 ¼ circular saw blade is another excellent product you can consider buying. 24, 40, and 60, all teeth options are available. Go for the one that suits your needs. The high-quality materials and excellent features enable it to perform outstandingly.

GoYonder produces all kinds of saw blades, which offer incredible value. This one is also an excellent blade from them. Thin kerf ensures smooth finishing while anti-stick coating reduces friction and gumming. As a result, you get a blade with less vibration and high durability.

The cutting time of the blades is also pretty fast. You can use it to cut all kinds of wood, including softwood, hardwood, and plywood. In a word, it is one of the best 7 ¼ circular saw blades you can purchase today.

Pros
  • Wear-resistant tip.
  • Provides smooth finishing.
  • Excellent for carpentry.
  • Multiple teeth options are available.
  • Excellent accuracy.
Cons
  • Average build-quality.

Final Words: Best 7 1/4 Circular Saw Blades

These were the 7 best 7 ¼ circular saw blades you can buy today. Selecting the best one from these models can be tough for many. All of the saw blades offer excellent performance. If you haven’t decided yet which one to buy, our expert suggestion may help you.

Best Budget 7 ¼ Circular Saw Blade 2022

If you are on a tight budget, then Makita Circular Saw Blade can be the best option for you. It has a thin kerf with sturdy tips to offer excellent quality results. We recommend you buy the set of 10 blades. That is the most cost-efficient option.

Overall Best 7 ¼ Circular Saw Blade 2022

After a lot of research and testing, our experts selected the Freud Diablo Saw Blade as the best 7 ¼ circulars saw blade. The high-quality materials with unique teeth design offer a smooth finish. Besides, the durability is also outstanding. If you buy Diablo, we believe you will be totally satisfied.

Frequently Asked Questions

What is Kerf on a Saw Blade?

Kerf refers to the thickness of the cut a saw blade produces. The lower the kerf, the smoother the finishing will be. So, try to buy a saw blade with a thin kerf. Read more about How to Sharpen Black & Decker Hedge Trimmer Blades?

Are Carbide saw Blades Worth it?

Most saw blades today offer carbide teeth. There are various qualities of the carbide. Overall, they can provide excellent performance and high durability. So, you can say that the carbide saw blades are worth it.

How thick of wood can a 7 ¼ circular saw cut?

Standard 7 ¼ circular saw can cut wood with a maximum thickness of 2 ½”. The blade you use also plays a significant role here. Read more about Best Portable Sawmill for the money

Can a 7 ¼ circular saw cut a 4×4?

Most 7 ¼ circular saws today can not cut wood with a thickness of more than 2.5 inches. So, for getting 4×4, you will need to make two cuts.

Recent Posts