How to Start a Leaf Blower? Easy Techniques to Learn


how to start a leaf blower

How to Start a Leaf Blower? When you have a yard that is overrun with leaves, a decent leaf blower is one of the most useful and time-saving tools you can own. Rather than spending endless hours raking leaves into piles, you can quickly blast through them, saving you time and aggravation.

There are several different types of leaf blower vacuums, and each one requires a slightly different method of starting. Although electric corded or cordless blowers are incredibly easy to run, gas-powered versions need a little more effort. Whichever kind you have at home, we’ll show you how to start a leaf blower in this article.

Corded Electric Machines

 

Corded Electric Machines

 

You have one of the simplest styles to start if you have a corded electric leaf blower. Be sure and read the instruction manual to learn how your model works, but it shouldn’t be any more difficult than plugging it in and turning it on.

If you’re having trouble starting a new gadget, make sure it’s plugged into a power outlet and that the power is turned on. If you read the manual and followed the instructions and it still does not work, there might be an issue that needs to be resolved.

Cordless Electric Machines

 

Cordless Electric Machines

 

To begin, cordless leaf blowers are essentially the same as corded models. All you have to do is read the manual, plug in the battery, and press the “start” button. If you’re having trouble starting a battery-powered leaf blower, the first thing you can do before taking it to a repair shop is make sure the battery is fully charged and ready to go.

How to Start a Leaf Blower? Complete Guide

1. Stroke Gas-Powered Machines

A 2-cycle engine is used in the majority of gas leaf blowers. This is due to the fact that this engine is both small and powerful. These are slightly more difficult to start than electric models, so here are the steps you should take.

Read more about Greenworks Leaf Blower Reviews

  • Prepare the Gas And Oil Mixture

To operate, 2-stroke engines need fuel that is a combination of gasoline and oil. Most units work on a solution of one part oil to 50 parts gas, or a 1:50 ratio. This equates to 212oz of oil per gallon of gas. However, you can consult your owner’s manual to ensure that this is the right ratio for your model.

In a gas can, add these ingredients in the correct proportions and shake to ensure proper mixing. Be sure to correctly calculate the quantities because using the wrong proportions will cause your blower to smoke and could even harm the unit.

  • Pour in Slowly

Once you’ve made the gas and oil mixture, slowly pour it into your leaf blower.

  • Make Sure the Starter Switch Is in the “On” Position

Some blowers have an “on” switch. If it is not in the proper spot, the blower will not start.

  • Set the Choke to The Starting Position

If you’re starting the blower from scratch, make sure the choke is in the starting spot. Before proceeding to the next phase, ensure that this is completed.

  • Prime the Engine

The engine must now be primed. Five or six times press the primer bulb.

  • Pull the Starter Cord

Keep the cord tightly in one hand and the blower tightly in the other. Pull the cord as hard as you can. You can need to repeat this process four or five times to start the engine, and after each pull, feed the cord back in slowly rather than snapping it back into position.

  • Enable the Engine to Run For A Few Seconds

Allow the engine to run for 10 to 30 seconds after starting it. If you have a machine with a manual choke, after the engine has been running for a while, set the choke to “run.” Some models have a semi-automatic choke that automatically returns to the run position. You don’t need to be concerned if you own one of these ones.

  • Blast Those Leaves!

If you followed the steps right, your engine should be running, and you should be ready to go.

2. 4-Stroke Gas-Powered Machines

If you have a four-cycle leaf blower, the operation is almost identical to that of a two-cycle unit. The main distinction is that they run on pure gas rather than a gas-oil blend. Simply add fuel to your machine and proceed as directed for 2-cycle blowers.

  • Troubleshooting

There are a few things you can check if you are having trouble starting your blower despite following the steps above.

  • Check that the blower has fresh fuel.

Since fuel does not age well, if your fuel is more than 30 days old, your blower will not start or function properly. If the fuel has gone bad, drain it and replace it with new fuel.

  • Examine the spark plug

Another common explanation for a blower not starting is a broken, dirty, or old spark plug. Check it, clean it, or replace it as needed, and then restart the blower.

  • Examine the air filter

Check that the air filter is not clogged or dirty, as this would also prevent your machine from starting. Take the panel off and check the filter. Offer it a fast clean if it’s just a little dirty. If it is extremely dirty, it might be preferable to replace it.

  • Ensure that the fan is not obstructed

A clogged fan would also prevent a blower from properly starting. Check for any leaves or other debris that may have become lodged within. Remove any obstructions that might be stopping it from turning and try again.

Learn more about What is a Good CFM for a Leaf Blower?

Final Thought: How to Start a Leaf Blower?

Since each leaf blower is special, the most important thing to do is read the manual. Make sure you know what kind you have – particularly if it’s a gas-powered model – and follow the instructions in the manual as well as the instructions in our guide. This should ensure that you can start your machine quickly, conveniently, and with minimal fuss.

Recent Posts